Ohme Home Pro vs. Pod Point Solo 3S: Which Is Better? Here’s My Verdict
 |
Written by Chris Chevalier-Moniz Last updated on August 2026 |
Key Takeaways:
- Ohme and Pod Point suit different priorities. Choose Ohme for smarter tariff optimisation and Pod Point for a simpler installation journey and longer warranty cover.
- Both chargers cost roughly the same once installed. The headline unit price can be misleading, so compare the full supply-and-install cost before deciding.
- Ohme is stronger for dynamic energy tariffs. It can adjust charging around changing electricity prices, reducing the risk of charging at expensive times.
- Pod Point is better for simple off-peak scheduling. It works well for customers with fixed overnight charging windows who do not need advanced automation.
- Pod Point offers stronger warranty protection. Its five-year cover provides more long-term reassurance than Ohme’s three-year warranty (provided the installer has done the POD training and registered on the POD app).
- Ohme provides faster fault support in my experience. Quicker diagnosis and replacement can reduce downtime, repeated installer visits and customer frustration.
- Flat-rate tariff customers may not need either charger’s advanced features. A simpler, lower-cost 7kW charger could provide the same practical charging result for less.
Table of Contents:
- Pricing & installation
- Tariffs
- Connectivity & hardware
- Warranties & customer service
- My final verdict
A lot of people are comparing Ohme and Pod Point online these days. And I understand why there’s a lot of confusion, as both of these chargers look almost identical on a specification sheet.
After all, the Ohme Home Pro and Pod Point Solo 3S are both 7.4kW, single-phase Type 2 chargers designed for everyday home charging.
However, they offer two noticeably different routes into EV ownership. Ohme prioritises software, energy tariff integration and automated charging at cheaper times, while Pod Point prioritises a simpler supplied-and-installed journey with stronger warranty options.
I supply both brands, and the right choice usually depends on whether you value energy optimisation more, or convenience and reassurance more.
Let’s get started with pricing and the installation experience you can expect with either model:
Ohme vs Pod Point: How do they compare pricing and installation-wise?
If you’re a homeowner reading this, the quick answer is that both chargers cost virtually the same amount once installed on the wall (around the £1,000 mark). The pricing is almost identical for 7.4kW single-phase smart home charging with standard installation included.
And if you click on our Pod Point Solo 3S and the Ohme Home Pro product pages, you’ll see there’s very little difference in price between them on our website.
But there are different options with Pod Point on how to go about paying, even if the end result is largely the same.
Ohme vs Pod Point: Which EV charger is best for smart tariffs?
| Consideration | Ohme Home Pro | Pod Point Solo 3S |
|---|---|---|
| Best suited to | Dynamic and smart EV tariffs | Fixed off-peak tariffs |
| Charging control | Automatically adjusts charging around tariff data | Follows a schedule set in the app |
| Half-hourly price changes | Can respond to changing rates through compatible integrations | Does not dynamically follow changing rates |
| Customer involvement | Lower once preferences have been set | Customer may need to manage the schedule |
| Main benefit | Greater automation and tariff optimisation | Straightforward scheduled charging |
Ohme is the stronger choice for customers who want their charger to respond automatically to dynamic energy prices. While Pod Point is better suited to customers who use a fixed off-peak tariff and are happy to schedule charging manually.
Both chargers are able to reduce charging costs by moving sessions into cheaper periods, but they achieve this in different ways. The Ohme Home Pro connects directly with compatible energy suppliers through an API with dynamic and tracker tariffs such as Intelligent Octopus Go or British Gas PeakSave, backed by OZEV-compliant smart hardware.
It can read changing electricity prices and automatically adjust the charging schedule without the homeowner repeatedly changing settings in the app.
This makes Ohme particularly useful for dynamic tariffs where the cheapest charging period can change from one half-hour window to the next. The customer tells the Ohme app how much charge they need and when the car must be ready. Ohme then schedules the charging around the available tariff rates.
Pod Point takes a simpler approach. The Pod Point app allows the homeowner to set a charging schedule, making it suitable for tariffs with a predictable off-peak window. Though it can't dynamically adapt to half-hourly price changes on tariffs like Octopus Agile.
However, it does not respond to frequently changing half-hourly prices in the same way as Ohme.
|
💡 |
For installers: How to choose the best charger for your customers Always match the charger to your customer's tariff and parking layout. Never rely on power output alone. You don’t want to suggest hardware based purely on speed as you might end up installing a charger that’s not the best fit for the job. I would consider these four key factors before making a decision:
Then making a recommendation is easy:
Of course, for this article, I’ve kept to Ohme and Pod Point examples, but you can check out our best-selling EV chargers here for other great alternatives. If you have any questions, just get in touch with me! |
Pod Point vs Ohme: Connectivity & Hardware — is Wi-Fi or 4G the better choice?
Ohme is the better choice for tricky driveways and areas with weak Wi-Fi thanks to its built-in 4G SIM and longer cable options, whereas Pod Point is ideal for standard driveways with a strong, reliable home network.
Here’s a breakdown of the key differences:
| Feature | Ohme | Pod Point (Solo 3S) |
|---|---|---|
| Primary Connection | Includes a built-in 4G SIM, but is 4G only, WiFi is not available | 2.4GHz Wi-Fi (Home network dependent) |
| Data Costs | Free for the lifetime of the charger | Free (uses home internet) |
| Best Location Match | Garages, remote driveways, or spots with poor Wi-Fi coverage | Driveways with strong, reliable home Wi-Fi signal |
| Cable Length Options | Standard 5m and longer-than-usual 8m cable options are available for those tricky driveway layouts | Only a 5m cable option |
|
✅ |
Good to know for installers: When evaluating a customer's driveway and Wi-Fi setup, I also encourage you to apply these three key rules:
|
For homeowners, this is perhaps the fundamental difference between the two.
Pod Point vs Ohme: Warranties, fault resolution, and customer service — which brand offers better support?
This is a tough one and really depends on the granular details of the job.
Pod Point wins on long-term hardware protection with its superior 5-year warranty, but Ohme takes the lead on customer support thanks to its rapid 24-hour unit replacements, which will save installers time and hassle.
| Feature | Winner | Why It’s The Winner |
|---|---|---|
| Warranty | Pod Point |
Pod Point offers the same standard 3-year warranty that Ohme does; however, it allows for an extended subscription option. Pod Point includes 5 years of cover (hardware and installation) versus Ohme's 3 years. However, this is provided an installer has done POD training and registered on POD’s installer app. Pod Point also has a ‘Pod Drive subscription’ that provides a lifetime warranty and up to 7,500 annual miles in cashback for £34/month over 36 months (£1,224 total plus initial fee). Ohme, meanwhile, offers no extended warranty or subscription options. |
| Customer service | Ohme |
Ohme has much better customer service in terms of responsiveness, often able to rapidly diagnose and dispatch replacement units within 24-hours. And almost always resolving issues end-to-end within approximately three working days. Pod Point, on the other hand, has been criticised for its slower response times and lengthier diagnostic processes when troubleshooting faulty hardware. So if you’re an installer, you might want to think about how Ohme's quick replacement process avoids repeated, unbillable site visits for electricians and speeds up unit switchovers. |
|
📌 |
Installers: A Note on Pod Point for Commercial Installations Think carefully before recommending Pod Point for commercial jobs because its closed software ecosystem prevents clients from ever switching billing providers without replacing the hardware. Ohme and Pod Point are both strong options for domestic charging. Pod Point’s commercial range, however, operates within a closed ecosystem. Commercial customers must use Pod Point’s billing platform. They cannot freely move the existing hardware to another billing provider. This means that if the customer later wants to change platforms, they may need to remove the existing chargers and install replacement hardware. That creates unnecessary cost, disruption and risk for workplaces, universities, car parks and retail sites. I favour commercial charging systems that give the customer greater flexibility over their billing platform. A commercial EV charging installation should adapt as the client’s requirements change, rather than locking them into one provider. |
My final verdict: What is the main difference between Ohme and Pod Point?
Choose the Ohme Home Pro for smarter tariff optimisation and greater installation flexibility. Or choose the Pod Point Solo 3S for a managed installation and stronger long-term warranty cover.
For homeowners, the right choice depends on your energy tariff and how much control you want over the installation. I would choose Ohme if you use, or plan to move to, a smart EV tariff such as Intelligent Octopus Go or Agile. Its automated tariff integration, charging optimisation and session-level cost tracking give it a clear software advantage.
Pod Point’s strongest argument is simplicity and reassurance. Its five-year warranty gives you two more years of standard cover than Ohme, while its end-to-end installation service removes the need to source an electrician, compare quotes or coordinate the work yourself. That single point of contact can be particularly valuable for renters and flat owners dealing with landlords, freeholders or grant requirements.
The trade-off is control. Pod Point assigns an installer from its own network, so it is less suitable if you already have a trusted electrician or want more say over how the job is completed. Ohme gives you more freedom to select the installer, specify the cable length and tailor the installation around the driveway.
For wholesalers and installers, I see Ohme as the stronger commercial opportunity. It allows independent tradespeople to keep the installation work, offers five-metre or eight-metre cable options, and provides trade-level support. Pod Point is also an option for installers, as they can buy the charger and compete on price with Pod Point’s own installation service.
If you use a flat-rate electricity tariff and have no plans to switch, neither charger’s smart features will deliver their full value. A simpler, lower-cost home charger may be the more sensible purchase.
I hope you found this Ohme charger vs Pod Point guide useful.
Now, match the charger to the tariff, property and customer rather than choosing on brand name alone. Explore our Ohme chargers category page and our Pod Point chargers category page, or speak to my Volta EV team for help specifying the right unit for your next installation.
You can also read my Pod Point home charger review here to get my personal thoughts on that charger on its own.
About the author: Chris Chevalier-Moniz
Founder & CEO of Volta EV
Over the past 7 years, Chris has helped thousands of customers buy EV chargers across different industry segments, from small-scale domestic home setups to large commercial projects.
Chris started Volta EV from his nan's house, which he used as a warehouse. Since then, the business has grown organically, without a huge investment round or big bank loans.
Before working in the world of EVs, Chris had another decade under his belt in lighting.
You can contact him by email chrischev@voltaev.co.uk or by calling 01883 789 148.